VCSEL Laser Diodes for ToF and 3D Sensing

ToF · 3D Sensing · VCSEL Illumination

VCSEL Laser Diodes for ToF and 3D Sensing Applications

Time-of-Flight (ToF) and 3D sensing systems use infrared illumination to measure object distance, reconstruct depth and detect spatial information. VCSELs are widely used as compact, fast-modulated infrared emitters in these systems.

Lumi supplies 850nm and 940nm SMD VCSEL components, including a 940nm VCSEL with an integrated photosensitive diode. These devices provide component-level options for compact optical sensing and OEM evaluation. High-power VCSEL arrays, dot projectors and complete ToF illumination modules require separate specification and availability confirmation.

850nm SMD VCSEL940nm SMD VCSELIntegrated VCSEL + PDOEM Component Supply
Active Infrared Depth Sensing850 / 940 nm
VCSEL → Target → Depth DataILLUMINATION · REFLECTION · DISTANCE MEASUREMENT
VCSEL TARGET Emitted IR pulse / modulation Return signal is measured by a separate receiver
850nm940nmCompact SMDToF / Proximity Evaluation
850 nm1206 SMD VCSEL · 2mW typical at 6mA
940 nm1206 SMD VCSEL · 7.2mW specified peak
1616 SMD940nm VCSEL with integrated photosensitive diode
3 GHzMinimum modulation bandwidth of the 850nm product at 6mA
Application Overview

How VCSEL Illumination Supports ToF and 3D Sensing

A ToF camera emits modulated or pulsed infrared light and analyzes the returned signal to determine distance. In a 3D sensing system, depth measurements can be combined into a depth map or point cloud.

01

Time-of-Flight Depth Sensing

The system measures the travel time or phase shift of emitted light after it reflects from an object. The receiver and timing electronics convert the return signal into distance information.

Key elements: VCSEL emitter · ToF sensor · timing / phase processing
02

Structured-Light 3D Imaging

An infrared pattern is projected onto a scene. A camera observes pattern deformation and reconstructs depth from the known projected pattern and imaging geometry.

Key elements: IR source · DOE / pattern optics · camera
03

Proximity and Presence Detection

Reflected infrared light can be used to detect nearby objects, presence or changes in the optical scene. System range depends on emitter output, receiver sensitivity, optics and target reflectivity.

Key elements: IR emitter · photodetector · threshold / signal processing

Technology distinction: ToF and structured light are different depth-sensing approaches. A VCSEL can serve as an illumination source in either type of system, but the required optical output, beam pattern, modulation and receiver architecture are not necessarily the same.

ToF System Architecture

Direct ToF vs Indirect ToF: Different Emitter Requirements

Before selecting a VCSEL, identify whether the sensor uses direct time measurement or phase-based indirect measurement. This decision affects pulse behavior, modulation frequency, peak optical power and receiver design.

Direct Time-of-Flight (dToF)

dToF measures the time between emitted optical pulses and detected return photons. The receiver commonly uses SPAD pixels with timing electronics such as a TDC.

  • Short optical pulses and defined pulse timing
  • Peak power and pulse energy are key design inputs
  • SPAD receiver and photon timing architecture
  • Optical filtering and ambient-light rejection
  • Multi-zone or histogram-based distance processing
Typical system use: compact ranging, autofocus, robotics and obstacle detection

Indirect Time-of-Flight (iToF)

iToF illuminates the scene with periodically modulated light and estimates distance from the phase difference between the emitted and returned modulation.

  • Continuous-wave or periodically modulated illumination
  • Modulation frequency and waveform quality
  • CMOS ToF pixel array and phase correlation
  • Receiver bandwidth and demodulation performance
  • Unambiguous range and phase-wrapping management
Typical system use: depth cameras, gesture sensing and machine vision

Product fit note: Lumi's published 850nm VCSEL specifies a minimum 3GHz modulation bandwidth at 6mA, but this value alone does not establish a complete dToF or iToF transmitter specification. The 940nm product pages do not establish a complete high-power pulsed array or ToF illumination module. Confirm pulse width, peak current, duty cycle, thermal limits and optical power under the intended drive waveform.

Infrared Wavelength Selection

850nm vs 940nm VCSEL for ToF and 3D Sensing

Both wavelengths are used in infrared sensing. The choice should consider detector response, ambient-light filtering, optical power, eye-safety design, package, beam angle and the specific system architecture.

850nm VCSEL

850nm is widely used in infrared illumination and optical systems. Silicon photodetectors can provide useful sensitivity in this wavelength region, depending on the detector design and optical filter.

  • Commonly used for IR illumination and sensing
  • Silicon detector compatibility should be checked
  • Visible red glow may be more noticeable than at 940nm
  • Lumi's 1206 product specifies ≥3GHz bandwidth at 6mA
View Lumi 850nm VCSEL →

940nm VCSEL

940nm is widely selected for compact infrared illumination, proximity sensing and ToF-related systems. It is outside the peak visible response of the human eye, but it remains invisible infrared radiation requiring appropriate laser-safety controls.

  • Common wavelength for ToF and proximity illumination
  • Silicon detector sensitivity is wavelength-dependent and generally lower than in the visible / shorter NIR region
  • Optical filtering and receiver responsivity matter
  • Lumi offers 1206 and integrated 1616 SMD directions
View Lumi 940nm VCSEL →

Do not select by wavelength alone. The 850nm and 940nm Lumi products have different optical and electrical specifications, packages and test conditions. Their product figures are not a controlled wavelength-only comparison. Compare the exact SKU data and verify the detector and optical filter at the chosen wavelength.

Lumi VCSEL Components

850nm and 940nm VCSEL Products for Optical Sensing Integration

Lumi's current product portfolio includes compact single-channel SMD VCSELs and a 940nm VCSEL with an integrated photosensitive diode. These products can be evaluated for optical sensing designs according to their published device-level specifications.

The listed products are compact SMD components. They should not be represented as multi-watt VCSEL arrays, dot projectors, complete ToF modules or automotive-qualified illumination assemblies unless a separate approved product specification confirms those configurations.

Published Product Specifications

Compare Lumi's 850nm and 940nm SMD VCSEL Devices

The table summarizes key device-level specifications for initial OEM screening. Refer to each product page and datasheet for full electrical, optical, mechanical and reliability details.

Parameter850nm 1206 SMD940nm 1206 SMD940nm 1616 SMD VCSEL + PD
Model1206ULM850-L1206VCA940R81616VCA940R8-PD0224-Z
ArchitectureSingle-channel VCSELSingle-channel VCSELVCSEL + photosensitive diode
Typical wavelength850nm940nm940nm
Wavelength range / central wavelength830–860nm934–946nm in detailed characteristics934–946nm in detailed characteristics
Optical output2mW typ. @ 6mA7.2mW specified peak in product summary7.2mW typ. in product summary; peak in detailed table
Operating current6mA test point10mA typical10mA typical
Forward voltageNot stated in summary table1.8V typical1.8V typical
Viewing / divergence angle12° typical10° in product summary23° typical (full width, 1/e²)
Modulation bandwidthMin. 3GHz @ 6mANot stated in current product summaryNot stated in current product summary
Package1206 SMD1206 SMD1616 SMD, 1.6 × 1.6mm
Integrated detectorNoNoYes, photosensitive diode
Published safety classificationNot stated in product summaryNot stated in product summaryClass 1M

Specification note: values are retained with their product-specific test conditions and descriptions. The 940nm 1206 and 1616 product records include different package and detector configurations; do not assume identical beam profiles or electrical behavior. The 940nm 1206 detailed table contains a power-unit notation that should be checked against the product summary and source datasheet before using the detailed table for a formal design limit.

Integrated Emitter & Detector

940nm VCSEL with Integrated Photosensitive Diode

The 1616VCA940R8-PD0224-Z combines a 940nm VCSEL and a photosensitive diode in a compact 1.6 × 1.6mm SMD package. It provides an integrated optical emitter and detector component for selected compact sensing architectures.

Compact 1616 SMD Optical Sensing Component

The VCSEL section provides 7.2mW typical optical output power at the stated test conditions, while the integrated photosensitive diode provides a separate optical detection function. The product is listed for consumer electronics, laser radar, machine vision and industrial applications.

  • 940nm VCSEL emitter in a 1.6 × 1.6mm SMD package
  • 7.2mW typical VCSEL output in the product summary
  • 10mA typical VCSEL operating current
  • 23° typical divergence, full width at 1/e²
  • Integrated photosensitive diode with 1pF typical capacitance
  • Class 1M laser safety classification in the product datasheet

Important receiver distinction: the integrated photosensitive diode is not a SPAD array and does not provide the photon-counting and timing architecture normally used in dToF receivers. It should not be described as a complete ToF image sensor or depth receiver. Check whether the integrated detector's sensitivity, active area, response and optical isolation meet the intended reflective sensing application.

Optical System Architecture

Typical VCSEL-Based ToF Sensing System

The VCSEL is the illumination component in a larger optical and electronic system. The receiver, timing or phase-processing circuit, optics and calibration determine the final depth measurement.

01 · EMITTER850 / 940nm VCSELPulse or modulated IR illumination
02 · DRIVERVCSEL DriverCurrent pulse, waveform and timing control
03 · OPTICSLens / Diffuser / DOEField of view and illumination distribution
04 · RECEIVERSPAD / ToF CMOSReturn-light detection and pixel readout
05 · PROCESSINGTDC / Phase EngineDistance calculation and depth map

Transmitter Design Inputs

  • 850nm or 940nm wavelength requirement
  • CW, modulated or pulsed operation
  • Peak current, pulse width and duty cycle
  • Optical power and illumination uniformity
  • Beam divergence and field of illumination
  • Driver rise/fall time and trigger synchronization

Receiver & System Design Inputs

  • SPAD, ToF CMOS or photodiode receiver architecture
  • Receiver sensitivity and optical filter bandwidth
  • Target range, reflectivity and field of view
  • Ambient-light conditions and multi-camera interference
  • Depth resolution, accuracy and frame rate
  • Calibration, thermal behavior and eye-safety assessment

Depth range, accuracy, frame rate and robustness are system-level results. They cannot be derived from a VCSEL's wavelength or nominal optical output alone. Validate the emitter, driver, optics, receiver and processing chain together.

3D Sensing Application Fields

Where ToF and VCSEL-Based 3D Sensing Are Used

VCSEL illumination is used across consumer, industrial and mobility sensing architectures. The exact light source and optical configuration vary by range, field of view, safety class and receiver design.

01

Smartphones & Consumer Devices

Compact infrared illumination supports depth measurement, proximity functions, face-related sensing and camera assistance in consumer electronics.

Design focus: compact package · low power · optical filtering
02

Face, Gesture & Presence Sensing

Active infrared systems can detect spatial information for user presence, gesture interaction and touchless control when paired with a suitable receiver and processing architecture.

Design focus: illumination pattern · working distance · receiver FOV
03

Robotics & Autonomous Systems

Depth cameras and compact ToF sensors provide distance and obstacle information for robot perception, navigation and human-robot interaction.

Design focus: range · ambient-light robustness · multi-camera interference
04

Industrial Machine Vision

3D imaging can support object measurement, bin picking, presence checks and spatial inspection in automated production environments.

Design focus: repeatability · target reflectivity · field of view
05

Smart Locks & Access Control

Depth and active infrared sensing can contribute to user-presence and spatial recognition functions in smart access devices. Biometric performance depends on the complete validated system.

Design focus: compact optics · illumination uniformity · safety
06

Automotive & In-Cabin Monitoring

ToF sensors can be used in driver and occupant monitoring, gesture interfaces and interior perception. Automotive deployment requires application-specific qualification and safety evidence.

Design focus: temperature · reliability · automotive qualification

The application examples describe industry use cases for ToF and 3D sensing technology. They do not mean that every Lumi SMD VCSEL SKU is already qualified or validated for each end application. Confirm the required optical output, package, safety classification and environmental qualification for each design.

Optical Integration

VCSEL Package, Beam Shaping and Illumination Design

The emitter package is only one part of the illumination design. A ToF or structured-light product may also require beam-shaping optics, a diffuser, a diffractive optical element or a multi-emitter array.

01

Compact SMD VCSEL

Surface-mount packages support automated PCB assembly and compact product layouts. Lumi's 1206 and 1616 products are component-level SMD options.

Lumi examples: 1206ULM850-L · 1206VCA940R8 · 1616VCA940R8-PD0224-Z
02

Flood Illumination

Flood illumination spreads infrared energy across a field of view. The optical design must consider uniformity, field angle, working distance and the receiver's sensitivity.

Design inputs: output power · diffuser · FoI · optical losses
03

Dot Projection & Structured Light

A dot projector uses projection optics, often including a DOE, to create a known pattern. The projected pattern and camera geometry are designed as a matched optical system.

Design inputs: dot count · pattern · DOE · camera calibration

What Lumi Currently Publishes

  • 850nm single-channel 1206 SMD VCSEL
  • 940nm single-channel 1206 SMD VCSEL
  • 940nm 1616 SMD VCSEL with integrated photodiode
  • Device-level optical and electrical specifications

What Requires Separate Confirmation

  • Multi-watt VCSEL array and multi-junction configuration
  • Dot projector or complete flood illuminator module
  • Custom field-of-illumination optics or DOE
  • High-current pulsed driver and system-level eye-safety design
OEM Engineering Selection

How to Specify a VCSEL for ToF or 3D Sensing

Share the sensing architecture and system requirements first. This helps determine whether a single-channel VCSEL, an integrated emitter-detector component or a custom illumination configuration should be evaluated.

Optical Source Requirements

  • Wavelength: 850nm, 940nm or another target band
  • CW, modulated or pulsed operation
  • Typical and peak optical output power
  • Pulse width, repetition rate and duty cycle
  • Modulation bandwidth and rise/fall time
  • Beam divergence and illumination field
  • Single emitter, array or integrated emitter-detector

System Integration Requirements

  • dToF, iToF, structured light or proximity architecture
  • Target distance and reflectivity
  • Receiver: SPAD, ToF CMOS or photodiode
  • Driver current, trigger and synchronization
  • Optical filter, diffuser, lens or DOE requirements
  • Ambient temperature and operating environment
  • Laser safety and required product qualification

Commercial & Customization Information

  • Prototype quantity and target production volume
  • Required package and PCB assembly process
  • Sample schedule and evaluation plan
  • Required datasheet and reliability documents
  • Custom optical or electrical requirements
  • End-product market and qualification target
Related Technical Resources

Learn More About VCSEL and ToF Technology

Explore the working principles, wavelength selection and device-level considerations behind VCSEL-based optical sensing.

How VCSELs Work in ToF Distance Sensing

Understand direct ToF and indirect ToF, pulse and modulation approaches, and the role of the emitter and receiver.

Read the ToF Guide →

850nm vs 940nm VCSEL for ToF & 3D Sensing

Compare wavelength selection, device configurations and the practical factors that matter beyond nominal wavelength.

Read the Wavelength Comparison →

What Is a VCSEL?

Review VCSEL structure, vertical-cavity emission, arrays, package formats and typical optical sensing applications.

Read the VCSEL Guide →

VCSEL Laser Diodes

Browse Lumi's published VCSEL portfolio, including 795nm, 850nm and 940nm device directions.

Explore VCSEL Products →

Laser Diode Package Types

Understand the differences between SMD, TO-can, butterfly and fiber-coupled package formats for OEM integration.

Read the Package Guide →

Photodiode Products

Review silicon and InGaAs photodetector options and match detector response to the selected optical source.

Explore Photodiodes →
Frequently Asked Questions

ToF and 3D Sensing VCSEL FAQ

Common questions about VCSEL wavelength, ToF architecture, integrated photodiodes and OEM component selection.

What is a VCSEL used for in a ToF sensor?

A VCSEL provides infrared illumination for the scene. In dToF systems, the source emits optical pulses and the receiver measures photon arrival time. In iToF systems, the source provides modulated illumination and the receiver measures the phase shift of the returned signal. The complete ToF system also requires optics, a suitable receiver, a driver and signal processing.

What is the difference between dToF and iToF?

dToF measures the time delay of returned optical pulses, often using SPAD pixels and timing electronics. iToF measures the phase difference between emitted and returned modulated light, commonly using a CMOS ToF pixel array. The two approaches have different emitter waveforms and receiver requirements.

Is 850nm or 940nm better for 3D sensing?

Neither wavelength is universally better. 850nm and 940nm are both used in infrared sensing. Selection depends on receiver sensitivity, optical filter availability, ambient-light conditions, visible red glow considerations, optical power, beam behavior and laser-safety design. Compare the exact emitter and receiver specifications.

Does Lumi supply VCSEL products for 3D sensing?

Lumi publishes 850nm and 940nm SMD VCSEL products, including the 850nm 1206ULM850-L, 940nm 1206VCA940R8 and 940nm 1616VCA940R8-PD0224-Z integrated VCSEL and photosensitive diode. These are compact device-level components. Confirm the required pulse, power, beam and system integration parameters for the intended ToF design.

Can the 940nm integrated VCSEL and photodiode replace a ToF receiver?

No. The integrated photosensitive diode is a detector element, but it is not a SPAD array or a complete ToF image sensor. A typical dToF system requires photon-sensitive receiver pixels and timing circuitry. An iToF camera generally uses a dedicated ToF CMOS receiver. The integrated device may be considered for other compact reflective optical sensing designs after system evaluation.

Can the 850nm 1206 VCSEL be used for high-speed modulation?

The 1206ULM850-L product specifies a minimum 3GHz 3dB modulation bandwidth at 6mA, with typical rise and fall times of 70ps under the stated test conditions. This is a device-level specification; the final system performance also depends on the driver, PCB, package parasitics, optical receiver and signal integrity.

Does Lumi currently offer multi-watt VCSEL arrays or dot projectors?

The current published Lumi product inventory includes compact single-channel SMD VCSEL products and an integrated 940nm VCSEL plus photosensitive diode. A multi-watt VCSEL array, multi-junction illuminator or complete dot projector is not established by these product records. Please contact Lumi with the required output power, field of illumination and optical configuration for a supply or custom feasibility review.

What information should I provide for a VCSEL ToF inquiry?

Provide the wavelength, dToF or iToF architecture, operating waveform, peak and average optical power, pulse width, repetition rate, modulation bandwidth, beam angle, target distance, receiver type, package, operating temperature, laser-safety requirements and estimated volume.

Can the same VCSEL product be used for proximity sensing and long-range ToF?

Not automatically. Proximity sensing and longer-range ToF can require very different optical power, pulse energy, beam shaping, receiver sensitivity and safety controls. Evaluate the device against the complete system requirements rather than assuming a product's wavelength alone makes it suitable.

Lumi VCSEL & Optical Sensing OEM Support

Developing a ToF Camera, 3D Sensor or Proximity Module?

Share your target wavelength, sensing architecture, optical power, modulation waveform, receiver type, beam requirements and package. Lumi can help review the published 850nm and 940nm VCSEL components and discuss project-specific supply requirements.

has been added to your cart.
Checkout