Laser Diodes for TDLAS Gas Sensing

TDLAS Gas Analyzer OEM Solutions

DFB Laser Solutions for Precision Gas Sensing

Lumi supplies DFB laser diodes and packaged laser solutions for tunable diode laser absorption spectroscopy (TDLAS) gas-sensing projects. We support OEM developers in matching laser wavelength, thermal control, optical output and package configuration to their analyzer designs.

Current gas-sensing solutions include dedicated 1650.9nm heating-type and 1653.7nm TEC-cooled methane lasers, fiber-coupled butterfly modules and cooled TO-CAN laser configurations.

TDLAS gas sensing OEM application using DFB laser diode technology
System Architecture

How Does a TDLAS Gas Sensing System Work?

TDLAS measures gas concentration by analyzing the absorption of laser light at selected molecular absorption wavelengths. A suitable laser source is an important part of the optical measurement chain.

TDLAS optical system architecture with DFB laser source gas cell photodiode and signal processing

The Main Components of a TDLAS Analyzer

A typical TDLAS system combines an optical source, a gas measurement path, a photodetector and signal processing electronics.

  • DFB Laser Source: Generates light near the selected gas absorption line.
  • Optical Path: Directs laser light through free-space optics or fiber.
  • Gas Cell: Provides the measurement path through the target gas.
  • Photodetector: Converts transmitted optical power into an electrical signal.
  • Signal Processing: Analyzes the absorption response to determine gas concentration.

The laser diode is one component of the complete analyzer. Its wavelength, tuning behavior and optical interface must be matched to the measurement system.

Wavelength Engineering

Start with the Gas Absorption Line When Selecting a TDLAS Laser

Selecting a laser for gas sensing requires more than identifying the target gas. The actual absorption feature and the analyzer's operating conditions determine the required laser wavelength and tuning range.

Understanding Laser Wavelength Scanning

A tunable DFB laser can scan across a selected molecular absorption feature by changing its operating current, temperature or both. The detector measures the transmitted optical signal as the laser wavelength changes.

The absorption response is then processed by the analyzer electronics. Depending on the system design, wavelength modulation spectroscopy (WMS) and harmonic signal analysis may also be used.

  • Target gas and molecular absorption feature
  • Center wavelength and required tuning range
  • Interfering gases and operating pressure
  • Temperature conditions and wavelength stability
  • Optical path length and detector sensitivity
Read Methane Laser Selection Guide →
Conceptual TDLAS laser wavelength scanning across a gas absorption line

Important Wavelength Selection Considerations

01

Target Absorption Line

Identify the exact molecular absorption feature required by the analyzer instead of selecting a laser only by gas name.

02

Wavelength Tuning

Confirm the center wavelength and tuning range available under the intended current and temperature conditions.

03

Linewidth and SMSR

Review spectral characteristics such as linewidth and side-mode suppression ratio against the analyzer's optical requirements.

04

Optical Output Power

Match optical output to the optical path, gas cell, coupling losses and photodetector requirements.

05

Thermal Control

Evaluate heating or TEC-based temperature control according to the required wavelength stability and system architecture.

06

Optical Interface

Select free-space output, single-mode fiber or other optical interfaces according to the analyzer's mechanical design.

Lumi Laser Diode Products

DFB Laser Diodes for TDLAS Gas Sensing

Explore Lumi's existing gas-sensing DFB laser products, including heating-type and TEC-cooled methane lasers, butterfly modules and fiber-pigtailed TO-CAN configurations.

Recommended Gas Sensing Laser Products

Product configurations and wavelength availability should be confirmed against the required model and ordering information.

Package & Optical Integration

Choosing the Right Laser Diode Package for TDLAS

Package selection affects mechanical integration, thermal management, optical coupling and the connection between the laser source and analyzer.

TO-can DFB laser diode integrated into a compact OEM gas sensing module
Compact Package

TO-CAN DFB Laser Diodes

TO-CAN laser diodes provide a compact package format for OEM gas-sensing equipment. Depending on the configuration, TO-CAN devices can be integrated with temperature-control components and fiber output.

  • Compact mechanical integration
  • Suitable for space-constrained analyzer designs
  • Available gas-sensing configurations with thermal control
  • Fiber-pigtailed options for optical coupling
Explore Package Selection →
Butterfly DFB laser module with fiber pigtail for optical gas sensing integration
Fiber-Coupled Integration

Butterfly DFB Laser Diodes

Butterfly laser modules combine a packaged DFB laser source with integrated thermal and monitoring functions. Fiber-pigtailed configurations can simplify optical connection in analyzer designs.

  • Integrated TEC and thermistor options
  • Monitor photodiode in supported configurations
  • Single-mode fiber output options
  • Suitable for fiber-coupled optical systems
Learn About Fiber-Coupled Lasers →

Package appearance in the illustrations is conceptual. Refer to the individual product drawings and specifications for actual dimensions, pin assignments, fiber interfaces and ordering configurations.

Industrial Gas Measurement

TDLAS Laser Sources for Industrial Gas Monitoring

TDLAS optical components can be integrated into different gas measurement architectures. The selected laser source depends on the target gas, measurement conditions and analyzer configuration.

Industrial natural gas pipeline monitoring with laser-based gas analysis equipment

Typical OEM Application Areas

Natural Gas Monitoring

Laser sources for methane measurement and natural gas analyzer development.

Industrial Process Gas

Optical gas measurement components for industrial process monitoring.

Gas Leak Detection

Laser source integration for gas detection and safety systems.

Environmental Monitoring

Optical components for environmental gas measurement instruments.

Optical Detection

Photodetectors for TDLAS Receiver Design

The photodetector converts the transmitted laser signal into an electrical output for subsequent measurement and signal processing.

InGaAs PIN photodiodes are commonly considered for near-infrared optical detection. The detector should be selected according to the laser wavelength, optical power, responsivity, bandwidth and receiver circuit requirements.

The laser source and photodetector should be evaluated together as part of the analyzer's complete optical receiver design.

OEM Engineering Support

From Target Gas to TDLAS Laser Diode Sample

For a new analyzer project, start by defining the target absorption line and required laser configuration. Lumi can review the existing product range and evaluate project-specific requirements.

TDLAS OEM laser diode selection workflow from target gas and wavelength to package detector and validation
01

Define the Target Gas

Identify the target gas, measurement range and required absorption feature.

02

Confirm the Wavelength

Provide the center wavelength and required tuning range for the analyzer.

03

Select the Laser

Match the DFB laser architecture, optical output and spectral requirements.

04

Choose the Package

Define TO-CAN, butterfly or fiber-pigtailed integration requirements.

05

Evaluate the Detector

Check detector spectral response, optical power and receiver requirements.

06

Validate the Sample

Test the selected laser with the actual driver, thermal control and optical system.

Project Requirements

What Information Should You Include in a TDLAS Laser Inquiry?

Providing the following information helps our team identify a suitable existing product or evaluate a project-specific configuration.

Requirement Information to Provide Why It Matters
Target Gas CH₄ or other target gas Identifies the absorption feature.
Center Wavelength Required wavelength in nm Determines the suitable laser configuration.
Tuning Range Required wavelength scan range Confirms absorption-line coverage.
Optical Output Power Required power and test conditions Supports optical path and receiver design.
Thermal Control Heating / TEC / Other Defines the temperature-control architecture.
Laser Package TO-CAN / Butterfly Determines mechanical integration.
Fiber Requirements SM / PM / Connector type Defines optical coupling requirements.
Photodetector InGaAs PIN / Other Helps evaluate the receiver configuration.
Sample Quantity Prototype / Development Helps determine the supply arrangement.
Annual Demand Estimated production volume Supports repeat-supply planning.
Technical Resources

Continue Your TDLAS Laser Selection

Explore related technical guides to understand laser architecture, methane wavelength selection and package integration.

Frequently Asked Questions

TDLAS Laser Diode FAQ

Common questions about laser source selection, wavelengths, packages and OEM integration.

What type of laser diode is commonly used in TDLAS?

DFB laser diodes are commonly used in TDLAS gas measurement systems because they provide narrowband emission and wavelength control around selected molecular absorption features. The appropriate laser depends on the target gas, absorption line and analyzer design.

Why are DFB laser diodes used for gas sensing?

DFB laser diodes provide single-frequency or single-mode optical emission suitable for wavelength-selective gas measurement. Their wavelength, tuning characteristics, optical power and spectral performance must be matched to the measurement requirements.

How do I choose the correct laser wavelength for TDLAS?

Start with the target gas and the specific molecular absorption line. Then confirm the center wavelength, required tuning range, operating temperature, interfering gas conditions and optical path design. A gas name alone is not sufficient to determine the correct laser model.

What is the difference between 1650.9nm and 1653.7nm methane DFB lasers?

Lumi offers a 1650.9nm heating-type DFB laser and a 1653.7nm TEC-cooled DFB laser. They use different thermal control architectures. The selection should follow the analyzer's target absorption line and temperature-control requirements.

What is the difference between TO-CAN and butterfly DFB lasers?

TO-CAN and butterfly packages provide different mechanical and optical integration formats. Butterfly modules can incorporate TEC, thermistor and monitor photodiode functions, while TO-CAN configurations offer compact package options. Check the exact product configuration for pinout and fiber details.

Can Lumi provide fiber-coupled DFB laser diodes for TDLAS?

Yes. Lumi's gas-sensing product range includes a fiber-pigtailed butterfly DFB family and cooled TO-CAN laser configurations with fiber output. Available wavelengths, fiber types and connectors depend on the selected model.

Does a TDLAS system require a separate photodetector?

A typical TDLAS optical measurement system uses a photodetector to convert transmitted laser light into an electrical signal. The detector should be selected according to wavelength, optical power, responsivity and receiver bandwidth.

Can Lumi evaluate custom wavelength requirements?

Lumi can review project-specific wavelength and package requirements. Please provide the target absorption line, center wavelength, tuning range, optical power, thermal-control requirements and expected quantity for feasibility evaluation. Custom evaluation does not imply that every wavelength is a standard stocked product.

What information should I provide for an OEM inquiry?

Include the target gas, center wavelength, tuning range, optical output power, package preference, fiber requirements, thermal-control architecture, sample quantity and estimated annual demand. This helps our team evaluate the suitable product configuration.

Engineering & OEM Support

Looking for a DFB Laser Source for Your TDLAS Project?

Tell us your target gas, required wavelength, package and optical interface. Lumi can help review the available DFB laser products and evaluate your OEM requirements.

has been added to your cart.
Checkout